EasyManua.ls Logo

Blitz PVHD-200 - Care and Cleaning; Installation; Electrical Connection and Initial Setup

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUA
L EN
5
Do not place hot items near the plastic components of this appliance
Do not place food products directly against the air outlet on the rear wall.
Store pre-packed frozen food in accordance with the frozen food manufacturer’s instructions.
The appliances manufactures storage recommendations should be strictly adhered to. Refer to relevant
instructions for storage.
Do not place carbonated or fizzy drinks in the freeze
Compartment as it creates pressure on the container, which may cause it to explode, resulting in damage
to the appliance.
Frozen food can cause frost burns if consumed straight from the freezer compartment.
Do not place the appliance in direct sunlight.
Keep burning candles, lamps and other items with naked flames away from the appliance so
that do not set the appliance on fire.
The appliance is intended for keeping food stuff and/or beverages in normal household as explained in
this instruction booklet the appliance is heavy care should be taken when moving it.
Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could
cause skin abrasions or frost/freezer burns.
Never use the base, drawers, doors etc. to stand on or as supports.
Frozen food must not be refrozen once it has been thawed out.
Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer
burn to the mouth and lips.
To avoid items falling and causing injury or damage to the appliance, do not overload the
door racks or put too much food in the crisper drawers.
Caution!
Care and cleaning
Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or
abrasive cleansers.
Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.
Installation Important!
For electrical connection carefully, follow the instructions given in this manual.
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible damages immediately to the place
you bought it. In this case retain packing.
It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow
back in the compressor.