USER MANUAL EN
7
Installing your new appliance
Before using the appliance for the first time, you
should review the following tips.
Ventilation of appliance
In order to improve
efficiency of the cooling
system and save energy, it is necessary to maintain good
ventilation around the appliance. For this reason,
sufficient clear space should be available around the
refrigerator.
It is advisable for there to be 50-70mm of
space from the back to the wall, at least 100mm from its
top, at last 100mm from its side to the wall and a clear
space in front to allow the doors to open 135°. Please
see the following diagrams.
Note:
•
This appliance performs well within the climate
class from
N
to ST showed in the table below.
It may not work properly if left at a temperature
above or below the indicated range for a long
period.
Climate
class
Ambient temperature
SN +10°C to +32°C
N
+16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Stand your appliance in a dry place to avoid moisture
damage.
Keep the appliance out of direct sunlight,
rain or frost.
Stand the appliance away from heat sources such as
stoves, fires or heaters.
Leveling of appliance
For sufficient leveling and air circulating in the lower
rear section of the appliance, the bottom feet may need
to be adjusted.
You can adjust them manually using a suitable
spanner.
To allow the doors to self-close, tilt the top
backwards by about 10mm.
To Next Page
Loading...