Need help?Do you have a question about the Blitz SBC i-Color and is the answer not in the manual?
Explains sequential valve control and automatic boost pressure correction.
Defines the meaning of DANGER, CAUTION, and ATTENTION warning symbols.
Provides essential cautions for installation to prevent hazards like fire or accidents.
Provides critical warnings and precautions for the installation process.
Step-by-step guide for installing the SBC i-Color LCD display unit.
Step-by-step guide for installing the MMD i-Color LCD display unit.
Guides on setting language, bypass type, and calibrating speed and RPM.
Details setting vehicle weight, drive train, and power loss for accurate readings.
Configures automatic and manual boost levels, gain, and learning modes.
Guides on calibrating speed, RPM, and horsepower for accurate readings.
Details setup for automatic and manual boost control parameters.
Explains learning modes and setting the boost limiter for performance tuning.
Explains sequential valve control and automatic boost pressure correction.
Defines the meaning of DANGER, CAUTION, and ATTENTION warning symbols.
Provides essential cautions for installation to prevent hazards like fire or accidents.
Provides critical warnings and precautions for the installation process.
Step-by-step guide for installing the SBC i-Color LCD display unit.
Step-by-step guide for installing the MMD i-Color LCD display unit.
Guides on setting language, bypass type, and calibrating speed and RPM.
Details setting vehicle weight, drive train, and power loss for accurate readings.
Configures automatic and manual boost levels, gain, and learning modes.
Guides on calibrating speed, RPM, and horsepower for accurate readings.
Details setup for automatic and manual boost control parameters.
Explains learning modes and setting the boost limiter for performance tuning.
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| Safety Rating | CAT III 600V |
| AC Voltage | 750V |
| DC Current | 10A |
| AC Current | 10A |
| Capacitance | 100μF |
| Frequency | 10Hz-10MHz |
| Measurement Functions | AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature, Diode Test, Continuity Test |
| Dimensions | 45 mm |
To Next Page