Need help?Do you have a question about the Block PS-100+ and is the answer not in the manual?
Guidance on proper disposal of old equipment and materials according to EU directive.
Guidance on where and how to safely position the device in its environment.
Instructions for safely connecting the device to a power source and managing the power cable.
Detailed instructions and warnings for safe handling, charging, discharging, and disposal of batteries.
Essential guidelines for safe operation, including power management and handling potential hazards.
Detailed technical specifications including speed, power, dimensions, weight, and system components.
Specific technical details of the Block tone arm, such as length, material, and mass.
Lists the items included in the scope of supply and those found in the plastic bag.
Identification and labeling of the main operating elements and components of the device.
Key considerations for equipment setup, including part management and required tools.
Instructions for correctly placing the turntable and ensuring it is level.
Guidance on positioning the motor and connecting the drive belt and power.
Steps for connecting the drive belt and adjusting the turntable speed.
Instructions for switching on and operating the motor to start the turntable.
Procedure for adjusting the tone arm counterweight and setting tracking force.
Instructions on how to mount the anti-skating weight and set its value.
Guidance on connecting the turntable to an amplifier using provided cables.
Final steps for preparing the turntable for operation, including mat placement and needle protection removal.
Recommendations for optimal placement to prevent interference and enhance performance.
Instructions for cleaning and maintaining the turntable, including needle protection.
Guidance on contacting service centers and preparing the unit for shipping.
Details on warranty coverage, invalidation conditions, and manufacturer rights.
Troubleshooting steps for when the turntable does not spin despite the engine being on.
Steps to resolve issues with no audio signal on one or both channels.
Guidance on resolving strong noise on the phono input, often related to grounding.
Troubleshooting for distorted sound, speed issues, or worn drive belts.
To Next Page
General