To Next PageTo Next Page
Need help?Do you have a question about the Blomberg DW 15140 NBL00 and is the answer not in the manual?
General| Brand | Blomberg |
|---|---|
| Model | DW 15140 NBL00 |
| Category | Dishwasher |
| Language | English |
Read all instructions before use, use only for intended purpose, and follow safety precautions.
Installation must follow manual, use qualified installers, disconnect power before service.
List of tools required for dishwasher installation.
List of materials required for installation, complying with local codes.
Details of parts supplied with the dishwasher, including manual bag and parts bags.
Technical specifications including load capacity, water pressure, and electrical details.
Ensuring the enclosure meets minimum dimensions for proper operation and appearance.
Instructions for safe electrical connection, emphasizing qualified electricians.
Guidance on attaching mounting brackets to secure the dishwasher to cabinetry.
Measuring enclosure height and adjusting dishwasher feet for proper fit.
Instructions for installing short or long supports based on enclosure height.
Steps for applying adhesive trim strips to the front edges of side walls.
Installing shut-off valve and connecting water supply line, including 90° elbow.
Methods for connecting the drain hose to plumbing, including loops and air gaps.
Applying foil to prevent steam damage to countertops when the door opens.
Guidance on positioning the dishwasher, ensuring hoses are not kinked.
Connecting drain hose, water supply, and electrical connections for operation.
Options for connecting water supply using metal braided hose or copper tubing.
Ensuring voltage and frequency match supply, connecting to mains after plumbing.
Proper grounding to reduce shock risk, ensuring compliance with local codes.
Adjusting feet for balance and height, securing dishwasher under countertop.
Attaching the two-piece toe kick, adjusting for height and depth.
Measuring and preparing the wooden door for mounting bracket attachment.
Ensuring dishwasher is square, level, securely fastened, and all connections are checked.
Steps to turn on the dishwasher, select a program, and run a complete cycle.
Guidelines for loading dishes, cutlery, and glassware for optimal cleaning.
List of items unsuitable for dishwasher, including materials and coated items.
Step-by-step guide to operate the dishwasher, from opening to unloading.
Description of On/Off, Start/Pause, and Cycle Select buttons.
Indicator for refilling rinse aid, visual check of the dispenser.
Indicator for refilling special salt, visual check of the salt container.
Lights indicating the progress of the wash cycle.
Instructions for filling and using the detergent and rinse aid dispenser.
Safety warnings for storing and handling dishwasher detergent.
Instructions and safety warnings for filling the rinse aid dispenser.
Procedure for setting water hardness level using a test strip and controls.
Steps for filling the salt dispenser, including initial water addition and salt type.
Cleaning the control panel, colored doors, stainless steel doors, and door gasket.
Instructions for cleaning filters and spray arms for optimal performance.
Detailed steps for removing and cleaning main, coarse, and micro filters.
Procedure for removing and cleaning the lower and upper spray arms.
Explanation of water flow and components with a water softener unit.
Explanation of water flow and components without a water softener.
Diagram and description of a standard wash cycle's steps and temperature changes.
Description of the heater's function, components, and resistance testing.
Details on the drain motor, its specifications, and resistance testing.
Information on the circulation motor, its specifications, and resistance testing.
Function of the thermic actuator for the detergent dispenser and its resistance.
Function of the door lock switch and how to test it for faults.
Role of the turbidity sensor in measuring dirt level during washing.
Function of the NTC sensor for temperature measurement and resistance table.
Description of the on/off switch and its control for energizing the dishwasher.
Function of the water inlet valve and its voltage, power, and resistance.
How the water counter measures water intake using a reed switch and magnet.
Function of the float switch for safety and starting the drain process.
Detection of faulty conditions via electronics during test or wash cycles.
Error related to the 3-way valve diverting water flow between spray arms.
Fault detected if NTC resistance is open, short, or outside specified values.
Heating fault occurs if temperature rise is insufficient during the heating step.
Error when no water pulses are sensed by the counter during water inlet.
Error if water counter senses pulses outside the water inlet step.
Flowchart to diagnose why the dishwasher is not running.
Flowchart to diagnose issues with water not entering the dishwasher.
Flowchart to diagnose excessive water intake or overflows.
Flowchart to diagnose why a selected program is not starting or running.
Flowchart for diagnosing programs that stop short or finish early.
Flowchart to troubleshoot issues with the dishwasher not draining.
Flowchart to diagnose problems with water circulation.
Flowchart to troubleshoot issues with the dishwasher not heating water.
Flowchart to diagnose why the detergent dispenser cover fails to open.
Troubleshooting common issues not identified by functional tests.
Diagram showing main board connections and color-coded wire resistances.
List of hydraulic components with their reference numbers and stock part numbers.
Method for detaching the control panel from the inner door.
Disassembly of the main board holder and card holder.
Disassembly of the display board holder and electronics.
Method for mounting the key holder and key cap.
Procedure for detaching the overflow gauge mechanism.
Method for removing the drain pump by turning and unscrewing.
Procedure for removing the pipe type heater by unscrewing spring clamps.
Method for removing the circulation pump and its motor holding plate.
Steps to detach filter support, feeding pipe, and upper spray arm.
Procedure for loosening screws and removing the side walls.
Method for releasing notches and removing the regeneration container lid.
Procedure for removing the electronic counter on the flowmeter.
Steps for loosening screws and unscrewing hinge arm connection sheets.
Method for removing the inner door plate by releasing lobes.
Working on the backside, removing concrete sheet, and hose holder.
Description of inner tub changes, sump connections, and filter support fixing.
List of common reference numbers for UB1 dishwasher models.
