How to fix a Blomberg DWT 52800 WIH that won't start?
If your Blomberg Dishwasher doesn't start, several factors could be at play. First, ensure the power cable is securely plugged in. Then, check your house's circuit breaker. Also, verify that the water inlet tap is open and the dishwasher door is fully closed. Finally, confirm you've pressed the On/Off button to turn the machine on.
What to do if dishes are not dry after Blomberg DWT 52800 WIH Dishwasher cycle?
If your Blomberg dishwasher leaves dishes wet, ensure dishes are arranged so water doesn't collect. Check and refill rinse aid if needed, and consider increasing the rinse aid setting. Avoid unloading immediately after the cycle; slightly open the door to let steam escape and wait for dishes to cool. If using a short cycle, switch to a longer one for better drying. Note that utensils with deteriorated surfaces may not dry well and aren't recommended for dishwasher use.
Why are there stains remaining on dishes after a Blomberg DWT 52800 WIH cycle?
If your Blomberg dishwasher leaves stains on dishes, it might be due to an unsuitable wash program. Try selecting a program with a higher temperature and longer cycle time. Also, if you're using powder detergent, make sure it's stored properly in a closed container and not in humid conditions. For convenience, consider using tablet detergents.
How to solve the problem of dishes not being washed clean in my Blomberg DWT 52800 WIH?
If your Blomberg dishwasher leaves dishes unclean, several factors could be the cause. Ensure dishes are loaded according to the user manual. Select a program with a higher temperature and cycle time. Check that the wash arms rotate freely and aren't blocked. Clean the wash arms and filters regularly. Make sure filters are installed correctly. Avoid overloading the baskets. Store powder detergent properly, and use enough detergent and rinse aid. Ensure the detergent dispenser lid is closed tightly.
Why does my Blomberg DWT 52800 WIH leave lime traces on dishes?
If you notice lime traces or a misty appearance on glassware from your Blomberg dishwasher, it could be due to insufficient rinse aid. Check the rinse aid indicator and add more if necessary, or increase the rinse aid setting. Also, measure the water hardness and adjust the dishwasher's water hardness setting accordingly. Be careful not to spill salt when refilling and ensure the salt reservoir lid is tightly closed. Run a prewash cycle to remove any spilled salt, and re-check the lid afterward.
Why does detergent remain in the detergent dispenser of my Blomberg DWT 52800 WIH Dishwasher?
If you notice detergent remaining in the dispenser of your Blomberg dishwasher, make sure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Ensure dishes aren't blocking the dispenser lid from opening or water from reaching it. Store powder detergent properly in a closed container away from humidity. Check the wash arm holes for clogs and clean them regularly.
Why is there a bad odor coming from my Blomberg DWT 52800 WIH Dishwasher?
A strange odor in your Blomberg dishwasher may be due to clogged filters. Clean the filter system regularly. If you're not running the dishwasher immediately after loading, remove food remnants and run the prewash program every two days. Leave the door slightly ajar to prevent odor buildup. Consider using commercial odor removers or machine cleaners.
Why is there rust or discoloration on dishes in my Blomberg Dishwasher?
Rust, discoloration, or surface deterioration on dishes in your Blomberg dishwasher can be caused by several factors. Ensure you don't spill salt when filling and that the salt reservoir lid is tightly closed; run a prewash cycle to remove any spilled salt. Remove salty food remnants before washing. Verify the dishwasher is properly grounded to prevent static electricity. Avoid using harsh cleansers like bleach. Don't use metal utensils for unintended purposes. Low-quality stainless steel silverware and already corroded items should not be washed in the dishwasher.
General| Control panel colour | White |
|---|---|
| Delayed start timer | Yes |
| AquaStop function | Yes |
| Child lock | Yes |
| Energy efficiency class | A++ |
| Water consumption per cycle | 9.5 L |
| Half Load Option | Yes |
| Washing programs | Intensive, Eco |
| Delay start (max) | 24 hours |
To Next Page
