EasyManua.ls Logo

Blomberg DWT37200 - Rinse Aid Dispenser Dose Setting

Blomberg DWT37200
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
USA
4
3
RINSE AID
Notice :
Only use rinse aids suited for use in
dishwashers. Rinse aids allow washing
water to rinse off more cleanly and
prevent watermarks or streaks on the
dishes.
If you use "2 in 1" or "3 in 1"
detergents / tabs, you do not need
additional rinse aid.
1. Open the rinse aid dispenser by pressing
the lock B.
2. Carefully pour in rinse aid to the MAX
mark.
3. Close the lid until it clicks in 3.
4. Carefully wipe off spilled rinse aid.
Excessive rinse aid causes excessive
foam formation, which may hinder
cleaning.
SET THE DOSE OF RINSE AID
The dose of rinse aid to be used can be
set by means of the dispenser regulator 4
between levels 1 and 6.
Change the setting, only if the following
applies after washing:
Watermarks are visible on the dishes:
Set dosage higher.
Streaks are visible on the dishes: Set
dosage lower.

Related product manuals