EN / 15
4.5 Adjusting the Legs
If the product is not in balanced position,
adjust the front adjustable legs by rotating
them to right or left.
4.6 Installation of the Cooler and
Freezer Products Side-by-side
When the freezer and cooler products are
installed side by side, the installation
should be performed so that the freezer
product (1) will be on the left and the cooler
product (2) will be on the right. To prevent
sweating problems that might occur
between products, anti-condensation ele-
ments are located on the left side of the
cooler product.
Freezer ( 1 ) Cooler ( 2 )
5 Preparation
Read the “Safety Instructions” sec-
tion first!
To Next Page
Loading...
