EasyManua.ls Logo

Blomberg FNT4454I - Installation Instructions

Blomberg FNT4454I
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
7
1. The space in the room where the
appliance is installed must not be
smaller than 10 cubic metres.
2. This appliance has been designed
to operate in ambient temperatures
up to 38 degrees C (100 degrees F)
and is equipped with Freezer Guard
technology which ensures that even
if the ambient temperature falls to
-15 degrees C, frozen food in the
freezer does not thaw thanks to this.
So, you may then install your appliance
without having to worry about frozen
food in the freezer being spoilt.
3. Do not place the appliance near
cookers, radiators or in direct sunlight
as this will cause your appliance to
work harder. If installed next to a
source of heat or freezer, maintain the
following minimum side clearances:
From Cookers 50 mm (2”)
From Radiators 300 mm (12”)
From Freezers
25 mm (1”)
4. Refer to "Maintenance and
cleaning" section to prepare your
appliance for use.
5. A special receptacle is supplied to
store the mains plug during transit.
The receptacle is fixed at the back of
the cabinet, on the side of the
compressor (see diagram). Gently
remove the plug from the receptacle.
Never pull the mains cord, you may
damage the appliance. In the case of
transportation, ensure you locate the
plug in the receptacle provided to
avoid transit damage.
Installation instructions

Related product manuals