Blomberg GSN 1580 User Manual

13
Upper basket with variable height setting (some
models)
The upper basket is equipped with a lifting mechanism
which enables you to change the height of the basket
without having to remove it from the dishwasher, even if
it is fully loaded.
The height of the upper basket was set to its lowest
position at the factory. To lift the upper basket to the high
( ) position, hold it on one side and carefully pull it
upwards. To lift the opposite side of the basket, hold it
and pull it upwards in the same manner ( ).
To lower the upper basket, hold the basket lever on one
side and carefully lower the basket without releasing the
lever. ( ). Repeat the procedure with the lever on the
opposite side of the basket. Make sure that both levers
catch at the same height.
14
Height setting with empty basket
In this model, the height setting of the upper basket may
be changed using the wheels which are mounted at two
different heights.
Release the latches on both the right and left tracks of
the upper basket by pushing them outwards ( ).
Pull out the basket out completely ( ).
Place the basket back into the tracks at the desired height
( ).
Push the latches back into the correct position.
A
B
B
E
D
C
C
D
E
A
B
A
Rack (depends on the model)
Depending on the size of the glasses and cups, the rack
height setting may be adjusted ( ).
Cleaning your machine at regular intervals ensures longer
product life and reduces the risk of reccurring problems.
Warning
Always unplug the machine and turn off the water
supply before cleaning.
Use a gentle household cleaner for the outside and
the door seals.
Clean the control panel only with a moist cloth and
clear water.
Cleaning the filters
Clean the filters and the spray arms regularly. A dirty
machine will have a negative effect on the cleaning results.
Main filter
Coarse filter
Micro filter
1.
Remove the lower basket from the machine.
2.
Turn the coarse filter to the right and pull it out in an
upward direction ( ).
3.
Pull out the main filter ( ).
4.
Press on the two tongues of the coarse filter and
remove the micro filter ( ).
5.
Clean the filters thoroughly under running water. Use
a brush if necessary.
6.
Replace main filter
7.
Replace the micro filter and the coarse filter into the
main filter. Twist it clockwise until it clicks in.
Warning
Do not operate your dishwasher without a filter.
Ensure that your filters are correctly installed
Clean the filters regularly.
How to clean your dishwasher
7
C D E
1
2
3
A
B
C
1
A
B
C
2
3
E
D
C

Blomberg GSN 1580 Specifications

General

Appliance placement	Freestanding
Inlet hose length	1.5 m
Outlet hose length	1.5 m
Noise level	49 dB
Delay Start	Yes
Half Load Option	Yes
Washing programs	Eco, Intensive, Normal
Product size	Full size (60 cm)

Summary

Basket Height Adjustment

Upper & Rack Height Settings

Adjusts the upper basket height for optimal loading and rack height based on glass and cup sizes.

Dishwasher Cleaning Guide

Filter Cleaning Instructions

Guide to cleaning the main, coarse, and micro filters for optimal cleaning performance and results.

Component Cleaning Procedures

Spray Arm & Water Inlet Filter Care

Procedures for cleaning spray arms to remove blockages and maintaining the water inlet hose filter.

Control Panel Overview

Display & Function Button Guide

Explanation of the multifunction display indicators and primary function buttons for operation.

Dishwasher Operation Guide

Function Buttons & Initial Use

Detailed explanation of function buttons and steps for initial dishwasher setup and starting a wash cycle.

Dishwasher Programme Selection

Programme Choice & Options Overview

How to select wash programmes based on load and soiling, plus an overview of available programme options.

Programme Customisation

Option Buttons & Time Delay

Guidance on using option buttons and setting programme start delays for flexible scheduling.

Advanced Dishwasher Features

Programme Management & Status

Covers child lock, programme changes/cancellations, progress display, and status indicators.

Time Delay Functionality Deep Dive

Setting and Modifying Programme Delays

Detailed steps for setting, activating, and changing programme start time delays.

Programme Control & Status

Locking, Changing & Cancelling Programmes

Managing programme locks, modifications, cancellations, and understanding progress indicators.

System Indicators & Warnings

Salt, Rinse Aid & Warning Alerts

Understanding salt/rinse aid indicators, warning messages, and troubleshooting basic alerts.

Menu Structure and Settings

Accessing Settings & Factory Defaults

Navigating the appliance menu to access settings like language and water hardness, and reset to factory defaults.

Dishwasher Settings Configuration

Language, Hardness & Sound Settings

Adjusting language, water hardness, volume, brightness, contrast, and melody for personalised operation.

Factory Settings Reset

Restoring Default Appliance Settings

Procedure for resetting the dishwasher's settings back to their original factory default values.

Comprehensive Programme Table

Programme Details & Options

Detailed breakdown of programmes, temperatures, durations, water, and energy consumption with available options.

Dishwasher Troubleshooting Guide

Addressing Start-up & Cleaning Issues

Troubleshooting steps for when the dishwasher won't run and solutions for poor cleaning results.

Cleaning Performance Issues

Resolving Unclean Dishes

Causes and solutions for poor cleaning results, including common reasons for unclean dishes.

Dishwasher Performance Issues

Drying, Stains & Glassware Problems

Solutions for dishes not drying, tea/coffee stains, and milky deposits on glassware.

Glassware & Surface Finish Issues

Milky Deposits & Rust Stain Solutions

Tackling specific issues like milky glassware deposits and rust stains on appliance surfaces.

Detergent & Dishware Appearance

Residue, Decoration & Scratching Issues

Addressing detergent residue, fading decoration, and prevention of scratches on dishes.

Dishware & Water Management Problems

Breakage, Foam & Water Retention

Solutions for preventing dish breakage, foam formation, and water remaining after the rinse cycle.

Technical Specifications & Installation Safety

Installation Safety Guidelines

Essential safety precautions and guidelines to follow before and during appliance installation.

Dishwasher Installation Procedures

Water Connection & Inlet Hose Setup

Instructions for correctly connecting the water supply and the water inlet hose to the appliance.

Water Safety & Drainage Systems

AQUASAFE+, Drainage & Electrical Connection

Details on water protection systems, proper drainage setup, and electrical connection requirements.

Appliance Service and Support

Troubleshooting Malfunctions & Support

Guidance on resolving appliance malfunctions and contacting customer service for assistance.