Blomberg LDVN2284 - Page 37

Dishwasher / Instruction Manual
37 / 39
EN
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs
when the glass is pointed to light.
• Excessiverinseaidisused.>>>Lowerrinseaidsetting.Cleanthespilledrinseaid
when adding rinse aid.
• Corrosionhasoccurredonglassduetosoftwater.>>>Measurethehardnessofthe
supply water appropriately and check the water hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures
(e.g. 60-65°C). You can also use glass protective detergents that are commercially
available.
Foam forms in the machine.
• Dishesarewashedwithhand-washdetergentbyhandbutnotrinsedbeforeplacing
themintothemachine.>>>Hand-washdetergentsdonotcontainantifoam.Thereis
no need to hand-wash the dishes before placing them into the machine. Removing the
coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinseaidhasspilledintothemachinewhenaddingrinseaid.>>>Takecarethatrinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with
the help of a tissue paper/towel.
• Lidoftherinseaidreservoirisleftopen.>>>Makesurethatthelidoftherinseaid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishesarenotplacedorderlyinthemachine.>>>Loadthedishesasdescribedinthe
user manual.
• Basketsareoverloaded.>>>Donotoverloadthebasketsinexcessoftheircapacity.
Water remains in the dishwasher at the end of the programme.
• Filtersareclogged.>>>Checkifthefiltersystemisclean.Cleanthefiltersystem
regularly as illustrated in section “Cleaning and Care”.
• Dischargehoseisclogged/blocked.>>>Checkthedischargehose.Ifnecessary,
remove the discharge hose, clear the blockage and insert is as illustrated in the user
manual.
C
If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorised Service Agent. Never try to
repair a nonfunctional product yourself.