Blomus BASO Torch Base

To Next Page

Instructions: Torch Base

# 65046

blomus.com

65046_11.2018

Fold

Safety instructions:

Designed to accommodate all blomus wooden

torch poles. Attach the pole with the enclosed

adapter rings.

The torch stand must be placed on level and rm

ground.

BASO

Operating instructions:

1. The blomus torch base is

designed for 1 1/2, 1 1/4 and

7/8 inch poles. For the right

assignment of the adapter

rings please note illustra-

tion.

2. Slide the corresponding

adapter ring about 4-6

inches over the pole and

insert them into the torch

stand.

For a secure stand, the pole

must be held rmly in the

stand by the adapter ring.

3. We recommend positio-

ning the adapter ring as

high as possible in the tube

(see illustration).

1 1/2“ 1 1/4“ 7/8“

4-6“

Need help?

Do you have a question about the Blomus BASO Torch Base and is the answer not in the manual?

Summary

Operating Instructions for Torch Base

Pole Compatibility and Adapter Rings

Explains torch base compatibility with 1 1/2, 1 1/4, 7/8 inch poles and adapter ring use.

Inserting and Securing the Pole

Details sliding adapter rings 4-6 inches over the pole for a secure fit in the stand.

Optimal Adapter Ring Placement

Recommends positioning the adapter ring as high as possible within the tube for stability.

Safety Instructions for Torch Base

Pole Attachment with Adapter Rings

Designed for all blomus wooden torch poles; attach pole with enclosed adapter rings.

Placement on Level Ground

Torch stand must be placed on level and firm ground for safe operation.