Need help?Do you have a question about the Blow H-343 and is the answer not in the manual?
Connect the IP camera wirelessly to the network.
Connect the IP camera using an Ethernet cable to the router.
Instructions for downloading and installing the IPCAM P application on Android and iOS devices.
Guide for adding a camera using Ethernet connection via the IPCAM P app.
Methods to find and add Wi-Fi cameras using UID scan, manual entry, or LAN search.
Steps to enter camera details, save, and view the live feed.
Navigate to advanced settings to configure camera parameters.
Configure device settings, security, events, Wi-Fi, and recording modes.
Steps to change the camera's security code using the IPCAM P application.
Guide to connect the camera to a Wi-Fi network using the IPCAM P application.
Adjust motion detection sensitivity and choose event notification types.
Set up and play back video recordings stored on the SD card.
To Next Page
General
