Blu STUDIO 5.0 CE - Page 31

31 / 40
N0/WEAK SIGNAL TROUBLE SHOOING
No or weak
signal
Inspect the antenna and
antenna connector to see
if there’s any distortion
Replace the
defective
components.
Put a false antenna at RF PA
IC to see if there’s any signal
Replace RF
coaxial line
Make a false antenna at
RF filter, check if
there’s any signal
Saw filter is
damaged,
replace it.
Replace 26M oscillator
to check if the problem
is solved.
Re-solder or
replace CPU
MT6572
YES
YES
Yes
No
Check and replace RF
coaxial line to see if there’s
any signal .
YES
Replace RF PA
IC