Need help?Do you have a question about the Blue Demon IGBT BLUEARC 140MSI and is the answer not in the manual?
Risks and precautions related to electrical shock during welding.
Dangers of inhaling welding fumes and gases.
Importance of protective gear against arc rays.
Precautions against fire hazards caused by welding spatter.
Guide to setting up and operating the MIG welding process.
Explanation of the control panel and its functions for MIG welding.
Variables controlling weld quality and characteristics.
Balancing wirespeed and voltage for optimal welding output.
Safety guidelines for the operating environment.
Critical safety advice for machine operation and protection.
Essential safety steps before maintenance.
General| Input Phase | Single Phase |
|---|---|
| Input Frequency | 50/60 Hz |
| TIG Lift Start | Yes |
| TIG Torch Included | Yes |
| Stick Electrode Holder Included | Yes |
| Ground Clamp Included | Yes |
| Protection Class | IP21S |
| Duty Cycle | 60% @ 140A |
| Welding Process | Stick, TIG |
| Stick Electrode Size | 1.6-3.2mm |
To Next Page
