To Next PageTo Next PageWhy is my Blue Hawk Vacuum Cleaner losing suction during dry pick-up?
If your Blue Hawk Vacuum Cleaner experiences a loss of suction during dry pick-up, it could be due to several reasons: * The tank might be full, in which case you should drain and clean it. * The hose may be clogged; remove it and clear any obstructions. * The filter could be clogged; clean or replace it to restore suction.
What to do if my Blue Hawk Vacuum Cleaner loses suction when wet picking-up?
If your Blue Hawk Vacuum Cleaner is losing suction while picking up wet materials, it could be due to a few common issues: * The tank might be full. Empty and clean the tank. * The hose could be clogged. Detach the hose and remove any blockages. * The filter may be dirty. Try cleaning or replacing the filter.
General| Amps | 12 |
|---|---|
| Hose Length (Feet) | 8 |
| Vacuum Type | Upright |
| Floor Type | Carpet, Hard Floor |
| Included | Crevice tool, Dusting brush |
| Surface Type | Carpet, Hard Floor |
