Blue Rhino Endless Summer 233000

Questions and Answers

N
Nathaniel HooperJul 28, 2025
Why is the burner flame low on my Blue Rhino Endless Summer 233000?
- M
  Margaret DouglasJul 28, 2025
  If the burner flame on your Blue Rhino Patio Heater is low, several factors could be at play. First, the gas pressure might be insufficient; in this case, turn the cylinder valve off and replace the cylinder. If the outdoor temperature is below 40ºF and the tank is less than 1/4 full, try using a full cylinder. Also, check the supply hose for any bends or kinks and straighten it out. Finally, if the control knob is fully on, inspect the burner and orifices for any blockages.
B
Brandon NguyenAug 1, 2025
How to fix Blue Rhino Endless Summer 233000 Patio Heater pilot won't light?
- A
  alexgarzaAug 2, 2025
  If the pilot light on your Blue Rhino Patio Heater won’t light, there are several potential causes. The cylinder valve might be closed, so ensure it's open. There could be a blockage in the orifice or pilot tube, requiring cleaning or replacement. Air in the gas line can also prevent ignition; open the gas line and bleed it (pressing the control knob in) for no more than 1-2 minutes or until you smell gas. Low gas pressure, even with a fully open cylinder valve, could be the issue, necessitating a cylinder replacement. Lastly, if the igniter is faulty, use a match to light the pilot and replace the igniter.
H
heather70Aug 6, 2025
What to do if the burner won’t light on my Blue Rhino Endless Summer 233000?
- K
  Katie WilsonAug 6, 2025
  If the burner on your Blue Rhino Patio Heater won’t light, it could be due to a few reasons. Low gas pressure might be the cause, so turn the cylinder valve off and replace the cylinder. There might also be a blockage in the orifice, which needs to be cleared. Finally, make sure the control knob is turned to the ON position.
W
walkerjoelAug 10, 2025
Why does the pilot light keep going out on my Blue Rhino Endless Summer 233000 Patio Heater?
- J
  Julia CameronAug 10, 2025
  If the pilot on your Blue Rhino Patio Heater won’t stay lit, it might be due to dirt buildup around the pilot; clean the area. A loose connection between the gas valve and pilot assembly could also be the problem; tighten the connection and perform a leak check. Lastly, the thermocouple might not be working correctly, requiring a replacement.
N
Nicholas TurnerAug 14, 2025
Why does the emitter glow unevenly on my Blue Rhino Patio Heater?
- S
  Steven LangAug 14, 2025
  If the emitter on your Blue Rhino Patio Heater glows unevenly, several factors could be the cause. Low gas pressure is one possibility; turn the cylinder valve off and replace the cylinder. Another reason might be that the base is not on a level surface; place the heater on a level surface. If the heater is level, try cleaning the burner.
C
Caitlin PerryAug 18, 2025
What causes thick black smoke from Blue Rhino Endless Summer 233000 Patio Heater?
- R
  Richard PerezAug 18, 2025
  If you notice thick black smoke coming from your Blue Rhino Patio Heater, there is likely a blockage in the burner. Remove the blockage and clean the burner inside and out.
L
Lisa LopezAug 23, 2025
How to remove carbon build-up from Blue Rhino Patio Heater?
- I
  iharrisAug 23, 2025
  Carbon buildup on your Blue Rhino Patio Heater is likely due to dirt or film on the reflector and emitter. Clean the reflector and emitter to resolve this issue.