Why won't the main burners light on my Blue Seal G592 Grill?
If the main burners on your Blue Seal Grill won't light, it could be due to several reasons. First, the injectors might be the wrong size or blocked, so you should replace or clean them. Second, there might be a faulty gas control valve, which would require replacement. Lastly, the supply pressure could be incorrect, so you should check that the supply pressure is correct.
How to fix a Blue Seal Grill when the pilot won’t light?
If the pilot light on your Blue Seal Grill won’t light, it could be due to incorrect gas pressure, so check the gas pressure and adjust if necessary. Another possible cause is a blocked or incorrect size pilot injector, so check the injectors and replace if necessary. A faulty piezo ignitor could also be the reason, so replace the piezo ignitor.
How to fix incorrect burner flame color (yellow) on Blue Seal Grill?
If the burner flame on your Blue Seal Grill is the incorrect color (yellow), the burner aeration may be incorrectly set. To resolve this, adjust the burner aeration.
What to do if the burner goes out while using my Blue Seal G592 Grill?
If the burner on your Blue Seal Grill goes out while in use, it may be due to incorrect or fluctuating gas pressure, so check the gas pressure and adjust if necessary. Another potential cause could be a small pilot flame, which could be caused by a blocked or incorrect size pilot injector, so check the injectors and replace if necessary. Finally, the main injector may be blocked or the incorrect size, so check the injectors and replace if necessary.
What to do if the pilot drops out when knob released on Blue Seal Grill?
If the pilot light on your Blue Seal Grill drops out when you release the knob, try holding the control in for longer to see if the pilot will stay alight. The thermocouple may be faulty, so replace the thermocouple. Also, the pilot injector might be blocked or the incorrect size, so check the injectors and replace if necessary. Finally, the gas valve magnet could be faulty, so replace the valve magnet.
Why does the pilot go out when main burners come on in my Blue Seal G592?
If the pilot light on your Blue Seal Grill goes out when the main burners come on, it could be due to incorrect gas pressure, so check the supply and adjust the pressure. Another cause could be a faulty thermocouple, so replace the thermocouple. Finally, a faulty gas control valve could be the problem, so replace the gas control valve.
To Next Page
General