Why won't pool water clear up with Blue Torrent Water Filtration Systems?
If your pool water isn't clearing up, ensure that the chlorine, pH, and total alkalinity levels are checked and adjusted as needed. Also, make sure the flow rate through the filter is sufficient and that you operate the filter for longer periods. Verify that the valve is set to the 'Filter' position and that the sand level in the tank is between 1/2 and 3/4 full.
How to fix low water flow in Blue Torrent Sand Shark?
To address low water flow, begin by inspecting the skimmer and pump strainer baskets for any accumulated debris. Next, check for any restrictions present in both the intake and discharge lines. Also, look for any air leaks in the intake line, which can be identified by bubbles returning to the pool. Consider backwashing the filter. Finally, ensure the sand level in the filter is at least 1/2 full.
General| Brand | Blue Torrent |
|---|---|
| Model | Sand Shark |
| Category | Water Filtration Systems |
| Language | English |
To Next Page