ASSEMBLY INSTRUCTIONS
4
PREPARATION OF POOL
1. Inspect pool for irregularities that may interfere with the location of fence mounting brackets
and posts. Locate skimmer to be sure it will not interfere with fence.
2. Recommended items need for installation: cordless or power drill with Phillips head
screwdriver, saw, pencil and measuring tape.
FENCE INSTALLATION
STEP 1
Assemble mounting brackets. Slide support into mounting base (DIAGRAM 1-A). Screw two #8
screws into each side of support attaching it to the mounting base (DIAGRAM 1-B). Support
should be inserted flush to the backside of mounting base.
DIAGRAM 1-A DIAGRAM 1-B
To Next Page
Loading...
