6
ASSEMBLY INSTRUCTIONS (Cont.)
STEP 3
Install fence posts (DIAGRAM 3). Start by installing the two fence end-posts first.
The end-posts are identifiable by having rail holes only on one side. Fence end-posts must be
installed where fence will start and stop. Slide fence end-post onto the mounting bracket. Allow
at least 1/2” between the post and the pool’s top cap.This will allow for easy installation of
winter cover. Attach fence post to mounting bracket using four #8 screws.
Continue by mounting remaining fence posts to mounting bracket.
DIAGRAM 3
To Next Page
Loading...
