Operation
1. UP / DOWN BUTTON (Temperature control button)
- By pushing the up/down button, you can set the cabinet temperature.
2. DEFROST
- The electronic defrost controller is set at the factory to provide a defrost cycle every 8 hours.
- Once all frost is eliminated, the defrost control is changed to the freezer mode.
- The panel displays " dF" during the defrost.
3. DOOR OPENING INDICATOR
- If door is open, door opening indicator will be turned on.
- If the door is left open for 3 minutes, the alarm will sound continuously.
- The alarm will stop immediately upon closing the door.
To Next Page
Loading...
