9.
Cooling
Set the desired temperature, and the cooling mode will do the rest.
1. Press the MODE button until the COOL light lights up.
2. Set the desired temperature with th DOWN and UP buttons.
3. Set the temperature between 16 and 31°C.
Note: in this mode, the air conditioner automatically turns off at times to prevent
the cooling element from freezing. After a few minutes, the air conditioner will
turn back on automatically. You don’t have to do anything yourself.
Dehumidifying
If the humidity is high, the room automatically feels warmer. When you
dehumidify the air, the apparent temperature lowers. You need a hygrometer to
measure the humidity in your home.
1. Check if the water drain hose is connected. Note: you have to purchase this
drain hose yourself. See how to connect this drain hose on the picture (no. 5)
on the front page of the installation manual.
2. Press the MODE button until the DEHUM light lights up.
3. e temperature is automatically set at 2°C below room temperature
(16 to 31°C).
Note: in this mode, the air conditioner automatically turns off at times to prevent
the cooling element from freezing. After a few minutes, the air conditioner will
turn back on automatically. You don’t have to do anything yourself.
To Next Page
Loading...