EasyManua.ls Logo

BlueBuilt AC12010 - Startup and Performance Issues

BlueBuilt AC12010
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16.
Problem Check the following
e machine won't
start when I press
the ON/OFF button
e machine
makes noise
Is the surface of the machine sturdy and even? e
coolant in the machine also produces some noise.
is is normal.
e machine
doesn’t appear to
do much
Is the connector plugged in the socket?
Is the ground fault circuit interrupter on?
Is there a power outage in the neighborhood?
Empty the water tank, just to be sure.
e room temperature is lower than the set
temperature; adjust the set temperature.
Is the temperature set too high?
Is there direct sunlight? Close the curtains.
Are all the windows and doors closed?
Are there too many people in the room? ey
produce heat.
Is there something in the room that produces
(a lot of) heat? Turn it off or remove it.
Is the filter covered in dust or dirt? Clean it.
Is the air intake or the air exhaust (hose)
blocked? Unblock the air flow.
Is the room too large for 1 air conditioner?
Maybe you need 2 air conditioners.