Bluedio HT1 User Manual

User Manual
Bluetooth Headset
Brand name：Bluedio
Model name：HT1
FCC ID:VO8HT1
Read this user manual carefully and completely before using the product.
Important safety information
• Do not listen at high volume levels for long periods of time to prevent hearing
damage.
• Do not use the product if there is any potential danger.
• Do not turn the volume too high to hear sounds around you, turn down the volume if
you feel a tinnitus or the volume is too high.
• Do not use the product in an environment that requires your special attention(e.g. in
traffic).
• Keep the product, accessories and packaging parts out of reach of children, to
prevent accidents and choking hazards.
• Always keep the product dry to avoid corrosion .
• Do not use the product if you feel obvious discomfort, irritation or have other
adverse reactions.
• Do not expose the product to extreme temperatures below -15 (5 ) or above ℃℉
55 (131 ) ℃℉, to maintain the lifespan of headset or battery.
Delivery includes
H Bluetooth headset 1pc
USB charging cable 1pc
Audio cable 1pc
User manual 1pc
Charging and battery
Only use charging cable supplied by Bluedio, or may cause damage to the headset.
Warning
The DC voltage should be 5V and current should exceed 400mA.
Charging
The headset built-in battery is rechargeable and non-detachable. Do not replace the
battery.
1. Switch off the headset before charging.
2. Connect the smaller plug of the charging cable to the USB socket of the headset;
connect the other plug to the USB socket of your computer or other charging device;
the LED lights up red and the headset is being charged.
3. When the headset is fully charged(about 1.5~2hrs), the LED lights up blue or LED

Bluedio HT1 Specifications

General

Brand	Bluedio
Model	HT1
Category	Headsets
Language	English

Summary

Important Safety Information

Charging and Battery

Charging Warning

Specifies the required DC voltage (5V) and current (400mA) for charging the headset.

Bluetooth Pairing and Connection

Pairing Mode Activation

Activate by holding the MF button until the LED lights up blue.

Pairing with Mobile Phone

Steps to connect the headset to a mobile phone via Bluetooth using the MF button.

Disconnecting and Reconnecting

Procedures for disconnecting and reconnecting the headset to your mobile phone.

Call Management

Answering and Ending Calls

Instructions for answering and ending calls using the headset's MF button or mobile phone.

Advanced Call and Audio Features

Call Waiting and Redialing

Features for managing call waiting and redialing the last number.

Voice Dialing and Prompt Selection

Using voice commands and selecting voice prompt languages.

Muting and Audio Sharing

Functions for muting the microphone and sharing audio.

Connection Modes and Adjustments

Bluetooth Receiver and Line-in

Using the headset as a Bluetooth receiver or via line-in audio connection.

EQ and Track Controls

Adjusting equalizer settings and controlling music playback.

Technical Specifications

Detailed Specifications

Lists driver units, Bluetooth version, frequency response, and battery life.

Frequently Asked Questions (FAQ)

Pairing and Power Issues

Troubleshooting common pairing and power-on problems with the headset.

Connection Interruption and Audio

Solutions for sudden Bluetooth disconnection and lack of audio signal.

Usage and Recharging

Information on controlling mobile apps, recharging issues, and FCC compliance.