EasyManua.ls Logo

Bluedio T+ 3RD GENERATION - Frequently Asked Questions (FAQ); Pairing and Connection Issues; Power and Battery Problems

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the headphones are playing music from the inserted Micro SD card
when they have connected
to
your phone via Bluelooth. When there
is
an incoming call, you will hear a ringtone
or
you will see the blue light
blinking quickly. Now you can use the headphones
to
talk. (See
instruction "Using the headphones
to
talk")
Note: When the call is ended, the playback will resume. If the call
takes over 5 minutes, the Micro SD card mode will automatically
tum
off.
To
resume the playback, please
tum
on the Micro SD card
mode. (See instruction "Turning Micro
SD
card mode
on"
)
!!Iii
Transferring files
1.
Plug the large end
of
the included charging cable into
your
computer.
2.
Plug the small end into the headphones with a Micro SD card
inserted.
!!Iii
FAQ
1.Headphones cannot be paired
to
your
mobile phone.
Solution: Check if the headphones have entered pairing mode.
Check if your mobile phone supports the
HS
or
HF profile. Check
if
the Bluetooth search function
of
your
phone is tumed on. Check if
your
mobile phone is turned off. Check if the distance between the
headphones and your phone exceeds 10m.
2.Headphones cannot be turned on.
Solution: The battery runs low. Recharge the battery.
3.Can
the
battery be replaced?
•••
7
•••
Solution: The battery is non-<letachable and cannot be replaced.
4.Can the headphones
be used while driving?
Solution: DON'T use the headphones in an environment that
requires
your
special attention.
5.Bluetooth connection is suddenly interrupted within
10
matars.
Solution: Check
if
there is metal
or
other material interfering with
the transmission.
6.
No
audio signal
Solution: Check
if
the headphones are tumed off. Check if the
headphones are paired. If necessary, pair the headphones with the
audio source again. Check the connection
to
your
audio source.
The
volume is too low,
tum
up the volume.
7.Can the headphones ba used to control the
APPs
on
your
moblle phone?
Solution: Software settings
of
APPs
may be varied, thus some
APPs may not be controlled by the headphones.
8. The headphones can't be recharged.
Solution: Check the connection
of USB plugs.
If
necessary,
remove the USB cable and plug again.
Tum
on the headphones
then
tum
it off.
•••
8
•••

Related product manuals