What to do if my Bluepower Car Navigation system won't switch on?
If your Bluepower Car Navigation system doesn't switch on, it could be due to several reasons. First, ensure your car ignition is turned on. If that's not the issue, check the cable connections to make sure they are properly connected. Finally, inspect the fuse and replace it with a new one of the same capacity if it's burnt.
Why is there no sound coming from my Bluepower BLP-840?
If you're experiencing no sound from your Bluepower Car Navigation system, the volume might be set to the minimum or the mute function could be activated. Check the volume level and switch the mute function off to resolve this issue.
What to do if my Bluepower Car Navigation system is not reading my USB device or SD/MMC card?
If your Bluepower Car Navigation system isn't reading your USB device or SD/MMC card, it might be due to the file system format. Ensure that the USB disk file system is in FAT or FAT32 format, as NTFS is not supported. Also, if you are using SD/MMC card, make sure it is a map card. Note that due to different formats, some models of USB storage devices or MP3 players may not be read.
General| Brand | Bluepower |
|---|---|
| Model | BLP-840 |
| Category | Car Navigation system |
| Language | English |
To Next Page