Blueprint Controllers BDT-1 User Manual

Features
• 24houroperation
• Upto8ON/OFFsettingseverydayoftheweek
• Cyclesfrom1minuteto7days
• MaximumLoad:1725W/15A/115V
• RechargeableNiMHbatterysavesprogrammedsettingsincaseofpowerloss
Using the Blueprint Digital Timer
Before Use
Plugunitintooutletandallowinternalbatterytochargeforatleast2hoursbeforesettingtime.
Set Current Time and Day
1. Press“CLOCK”and“HOUR”atthesametimetosetthehour.
2. Press“CLOCK”and“MIN”atthesametimetosettheminute.
3. Press“CLOCK”and“WEEK”atthesametimetosetthedayoftheweek.
Program ON/OFF Cycles
1. Press“PROG”toenterthe“ON”settingmode.Thedisplaywillshow“1ON.”
2. Press“HOUR”tocyclethroughandselectthedesiredhouratwhichthetimerwillactivate.Repeatwiththe
 “MIN”button.
3. “Mo,Tu,We,Th,Fr,Sa,Su”willdisplay.Thiswillsetthetimertooperatedaily.
4. Press“WEEK”tocyclethroughandselectasingledayonwhichthetimerwillactivate.Continuetopress“WEEK”
tocyclethroughandselectoneofvariouscombinationsofdays.
5. Press“PROG”toenterthe“OFF”settingmode.Thedisplaywillshow“1OFF.”
6. Use“HOUR,”“MIN”and“WEEK”tosetthehour,minuteandday(s)oftheweekonwhichthetimerwillturnoff.
7. Repeatsteps1-6toprogramupto7additionalON/OFFcycles.
8. Whenin“PROG”mode,press“R”todeletethedisplayedtimersetting.Press“R”againtoreturntosettingmode.
Select Timer Mode
Press“ON/AUTO/OFF”tocyclethroughtimermodes.
• Select“ON”tokeeptimerconstantlyon.
• Select“AUTO”toruntimerasprogrammed.
• Select“OFF”toturntimeroff.
Random Function
Press“HOUR”and“WEEK”atthesametimetoshow“o”ontherighthandsideofthedisplay.Thiswillrandomly
extendONandOFFsettingsby2to32minutes.
Reset Function
Pressthesmallrecessedbuttonbelowthe“R”buttontodefaulttofactorysettings.
rev:92016
Digital Timer, BDT-1
READ AND SAVE THESE INSTRUCTIONS

Blueprint Controllers BDT-1 Specifications

General

Type	Digital Timer
Amperage	15A
Wattage	1800W
Timing Resolution	1 minute
Display	LCD
Count Direction	Up/Down
Memory Function	Yes
Alarm	No
Power Source	AC
Programs	8 on/off programs

Summary

Using the Blueprint Digital Timer

Before Use

Plug unit into outlet and allow internal battery to charge for at least 2 hours before setting time.

Set Current Time and Day

Instructions for setting the current hour, minute, and day of the week on the timer.

Program ON/OFF Cycles

Steps to set the timer's automated ON/OFF switching times for specific days or daily.

Select Timer Mode

How to choose between constant ON, AUTO programmed, or constant OFF modes.

Random Function

Enables random extension of ON/OFF times by 2-32 minutes for varied schedules.

Reset Function

Instructions to restore the timer to its default factory settings using a recessed button.

Blueprint Controllers Digital Timer Limited Warranty

What This Warranty Covers

Details what defects in materials and workmanship are covered under normal use.

Who This Warranty Covers

Specifies that the warranty applies to the original purchaser with proof of purchase.

How Long Warranty Coverage Lasts

States the warranty period is one year from the original date of purchase.

What This Warranty Does Not Cover

Lists exclusions such as improper installation, abuse, misuse, and consequential damages.

What BWGS Will Do

Explains BWGS will repair or replace defective products, not exceeding original purchase price.

How to Obtain Warranty Service

Instructs users to return the product with proof of purchase to the place of purchase.

How State Law Applies

Informs users about their specific legal rights granted by state law regarding the warranty.