Need help?Do you have a question about the Blueprint Subsea Oculus M Series and is the answer not in the manual?
Learn how to connect to the Oculus sonar and display live imagery within the ViewPoint software.
Understand the main sonar display layout showing live image, controls, and status information.
Access and understand hardware details, network addresses, and firmware versions of the connected sonar.
Select between Low and High Frequency modes for different operational ranges and resolutions.
Adjust the displayed sonar image range and understand its impact on update rate and power.
Modify sonar receiver gain to adjust echo brightness and improve visibility of faint or strong targets.
Utilize tools for measuring distances, capturing images, and adjusting display appearance for sonar data.
Learn how to initiate and stop recording sonar data into log files for later review.
Review previously recorded sonar imagery using playback controls for duration, speed, and repeat options.
Configure ViewPoint settings for log file storage, maximum file size, and speed of sound for accurate data.
Customize the sonar display's colour scheme to suit different lighting conditions and environments.
Adjust network settings, IP addresses, and other hardware configurations for the Oculus sonar.
Manually set IP address and subnet mask for the sonar when DHCP is disabled.
Control network bandwidth usage by limiting the sonar's data output rate.
Enable automatic gain control for optimal imagery or disable for manual adjustment.
Adjust gamma correction for non-linear mapping of acoustic echo intensities to the sonar palette.
Update the sonar's firmware to the latest version for new features and bug fixes.
Understand the fundamental principles of how the Oculus sonar transmits sound and receives echoes.
Explore the horizontal and vertical beam patterns that define the sonar's coverage and detection capabilities.
Learn how target position relative to the sonar beam affects visibility and detection on the display.
Optimize sonar mounting and angle for effective illumination and coverage of the seabed.
Understand how acoustic shadows are cast by targets and how they aid in determining height and shape.
Interpret sonar display brightness and patterns to understand target composition and orientation.
Compare Low and High Frequency modes for optimal range, viewing angle, and detail for different tasks.
Key operational points summarized for effective use of the Oculus sonar.
Detailed technical specifications for the Oculus sonar, including mechanical and electrical properties.
Provides dimensional drawings and key physical measurements of the Oculus sonar unit.
Details the pin assignments and signals for the IE55-12 series bulkhead connector.
Wiring diagram and description for the Ethernet sonar whip cable assembly.
Wiring diagram and pin assignments for the Ethernet deck lead cable.
Information on accessing the Blueprint Subsea website for updates, manuals, and support resources.
Contact methods and required information for obtaining technical assistance and troubleshooting help.
Details compliance with the EU directive on the Restriction of Hazardous Substances.
General| Brand | Blueprint Subsea |
|---|---|
| Model | Oculus M Series |
| Category | Sonar |
| Language | English |
To Next Page