General Maintenance
Ø Inspect valve assembly connections.
Ø Lubricate all moving parts in the clutch assembly.
Ø Keep machine clean and free of debris.
o Make sure to frequently clean metal scraps from the roll wheels.
Ø Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø Check to ensure the torch holder is clean and free of debris.
o Inspect the inside of the holder as well.
Ø Inspect all torch tips and ensure they are not damaged and the small cutting holes are clean.
Ø Inspect cutting hoses to ensure they are not damaged.
Ø DO NOT oil and connection points used in the gas/oxy system!
To Previous Page