Before you activate the vehicle, please place the vehicle in an environment with
good cellular signals, so that you can start the following procedures smoothly.
Step 1
Please search and download the “Blueshark” App in the mobile App store and complete the sign-up;
Step 2
Use the remote control to unlock the vehicle and power on the panel display. Within the time given, following the instructions on the App, so
the vehicle will enter the to-be-linked mode.
Step 3
On the app, tap “Add Vehicle” to enter the linking process. Select “Pre-link Vehicle” to link it according to the vehicle color and the VIN (Vehicle
Identification Number).
Step 4
The linking PIN code will be displayed on the panel screen. Enter the PIN code in the corresponding location of the App to complete the
linking process.
• After the vehicle enters the to-be-linked mode, the vehicle will return to the waiting state if there is no activity within 2 minutes or the
[READY] button is pressed. To re-link the vehicle, please repeat the above steps.
Link Vehicle
02
To Next Page
