03
Environmental Protection
1. At the rear end of the soleplate is a semi-circular protrusion that can be used to lever
out driven staples (see fig 4).
How to Remove Staples
How to Clear Blockages
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. When the product becomes completely unserviceable and
requires disposal, drain any fluids (if applicable) into approved containers and dispose of the
product and fluids according to local regulations.
1. Push in and down on the stapler feed bar and withdraw it from the stapler (see fig 1).
2. Remove any loose staples from the guidance track.
3. Using the tabs on the soleplate, pull the soleplate back and downwards to hinge it away
from the main body. Remove any damaged staples away from the staple exit path.
4. Hinge up the soleplate. Pull back on the tabs and move it back into position within
the main body (see fig 3).
Contact
Find out more about the BlueSpot® Lifetime Guarantee at www.BlueSpot.uk.com
Tel: 0800 093 0115
Email: sales@bluespot.uk.com
Orme Business Centre,
Greenacres Road,
Oldham,
OL4 3NT
To Previous Page
Loading...