BlueStar Aristo Series User Manual (English)

Questions and Answers:

H
Heather DiazJul 28, 2025
Why has the amount of filtered water suddenly increased or decreased in my BlueStar Aristo Water Filtration Systems?
- W
  William BensonJul 29, 2025
  If you notice a sudden change in the amount of filtered water from your BlueStar Water Filtration System, it could be due to a few reasons. A significant drop in the source water temperature can reduce the amount of filtered water. In this case, when the water temperature is within the specified range, the filtered water amount should return to normal. Also, ensure that the source water valve is open. If the filter appears to be blocked or damaged, contact service to replace it.
T
Thomas Young MDAug 7, 2025
What to do if water isn’t flowing out of my BlueStar Aristo Water Filtration Systems?
- W
  Walter PorterAug 8, 2025
  If water isn’t flowing out of your BlueStar Water Filtration Systems, first, check the source water valve to ensure that the water is supplied smoothly. If the water supply is fine, the tap might be out of order or it may be time to replace the filter. In both of these cases, contact service.
J
julie25Aug 16, 2025
How to fix unusual taste of water in BlueStar Aristo Water Filtration Systems?
- C
  Charles RogersAug 16, 2025
  An unusual taste in your BlueStar Water Filtration Systems water can occur if the water has been stored for too long; in this case, drain the stored water. It may also indicate that it's time for a filter replacement, so contact service to replace the filter.