Bluestone 80-5101 - Page 9

Unit Operation
2. Pressurization
Initial pressure is first pumped to 190mmHg. I ftbe current user's systolic blood pressure
is over 190mmHg, the unit will automatically re-inflate to the proper shelf.
I ,on
f.JLf
mmHg
8:29"
~/I]8
Note: Pressurization will sradually subside and u ltima tely stop when cuff is not
properly applied to the arm. If this occurs, pre .... START/STOP" button
to turn the unit off.
Unit Operation
3. Testing
Aftercuffinflation, airwill slowly subside as indicated by rhe corresponding cuff pressure
value. A flashing" • ,. will appear simultaneously on screen signaling heart beat
detection.
I
.J_
°B
mmHg
8:29".
:108
Note: Keep relaxed during testing. Avoid speaking or moving body parts.
4. Result Display
Tbree shon beeps sound wben testing is complele. The Scrcen will display
measurements for systolic and diastolic blood pressure . An indicator representing
the current measurement will appear nl:":-;t to the corresponding WHO Classification.
I
,,"
feU
mmHg
15
Indicator
~
8:3G". '5
:G108 ,
NOle: Refer 10 Page 23-24 for detail WHO Blood Pressure Classification Information.
t. .