Bluestream BS001CR - Bluetooth Connectivity; Pairing a Bluetooth Device

PAIRING TO A BLUETOOTH DEVICE
1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the device’s
Bluetooth memory.
2. Find the Bluetooth menu in your device and make sure the Bluetooth function is turned
ON (refer to your device’s user manual for instructions on finding the Bluetooth menu).
3. Press the FUNCTION button (1) until “BT” is shown on the LED Display and the
BLUETOOTH Indicator Light (D) flashes to ind
icate the clock is ready to be paired.
4. On your device, perform a Bluetooth “device discovery” to
add the BS001CR as a new
device.
5. When the speaker is discovered your device will display “BS001CR” in the Bluetooth
menu.
6. If your Bluetooth device asks for a password, enter “0000” and the device will now pair
with the BS001CR and be ready to use.
NOTE: The BLUETOOTH Indicator Light (D) will turn solid BLUE whe
n the speaker
has successfully paired with your device
7. If supported by your device’s menu, set the BS001CR as “set as authorized” or “add to
trusted devices”.
12:34
B
C F
E
A
EXPLANATION OF DISPLAY LIGHTS
LETTER DESCRIPTION
A
B
C
D
E
“AM” INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT
F
D
BLUETOOTH INDICATOR LIGHT
7
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.