12ENGLISH
• Be aware that snow, rain, and fog will have an adverse effect on ranging ability.
• Shiny, reflective surfaces will usually reflect better than dull, textured surfaces.
• Ranging under cloud cover can improve performance compared to bright sunny conditions.
• The position of the sun compared to the rangefinder and/or range target will greatly affect
performance.
• Flat surfaces perpendicular to the laser pulse will reflect better than curved surfaces or
surfaces angled in relation to the laser pulse.
• At longer distances, larger objects will be ranged easier compared to smaller objects
Never disassemble your laser rangefinder. Damage resulting from unauthorized disassembling
voids the warranty.
If unit doesn't turn on, display does not illuminate:
• Press the power button.
• Ensure that the device is fully charged.
If unit powers down (display goes blank when attempting to power the laser):
• The battery is either weak or low quality. Recharge the battery with the USB Type-C charging
cable provided (min. 3.7V/0.5A)
If target range cannot be obtained:
• Make sure the display is illuminated.
• Make sure that the Power button is being depressed.
• Keep your hands or fingers away from the objective lenses which will block the laser ray
path. Make sure the rangefinder is held steady while pressing the Power button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply
aim at the new target and press the Power button to acquire new readings.
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and
cause damage if physically abused. Do not use batteries that are damaged or show signs of
physical wear.
RANGING TIPS
TROUBLESHOOTING
To Next Page
Loading...