EN
EN
Tubeless tires with design perforation
bringing inflatable tire comfort without
puncture
6. Connector for charging the battery
15. Hook for attaching folded e-scooter
while carrying
Front LED floodlight
Rear disc electronic brake
Rear wheel suspension – shock absorber
Operating Instructions
Assembling
Step 1
After unpacking the product, straighten
the front rod to the vertical position
and close the fuse.
Don´t forget to secure the locking latch
slider down.
Step 2
Connect the cables,
both arrows on the cables
face each other. Adjust the
handlebar, align it
and vertically push down-
wards into the vertical bar.
Step 3
Use the Allen key to tighten all four
screws on the handle bar. Make sure all
components are safely tighten.
Step 4
One long press the ON/OFF button
to start the e-scooter.
To turn the light on press ON/OFF button
twice shortly.
Press and hold the button
and the e-scooter turns off.
15
6
Speed leverHorn
Brake
13
14
9
> 2120 <
To Next Page
Loading...
