Need help?Do you have a question about the BlueVision BVC6100LM and is the answer not in the manual?
Lists required hardware and software for camera setup and operation.
Details connecting equipment and installing the Camera Control Tool.
Identifies and describes the physical components and connectors of the camera.
Explains the meaning of different LED states for operational feedback.
Details the pin configuration for the Camera Link image output connectors.
Maps data bits to specific Camera Link pins for various output formats.
Illustrates timing diagrams for Camera Link output, including OB modes.
Configures exposure without a shutter, outputting video simultaneously.
Sets individual exposure times for R, G, B, IR channels.
Synchronizes exposure start based on external trigger for R, G, B, IR.
Controls exposure duration based on the external trigger pulse width.
Configure operational modes, line rate, exposure, gain, black level, AWB, EEN, and save settings.
Adjust DSNU, Shading, Filters, Binning, CL Config, LVAL, Test Patterns, and Chromatic Aberration.
Describes how to input LUT data one by one or via table files.
Allows adjusting image tone curves for R, G, B, IR channels graphically.
Provides options to select standard GAMMA curves for image tone adjustment.
Controls the output of specific pixel regions from the sensor.
Enables saving and replaying a single line of image data.
Adjusts edge detection sensitivity and gain for image detail enhancement.
Applies a high-pass filter to enhance edge details in the image.
Adjusts color balance and gain for R, G, B channels for accurate color reproduction.
Displays Baud rate, Model name, Firmware, and FPGA versions.
Manages saving and loading camera settings via text files.
Provides command input, recording, and playback capabilities.
Shows the control tool version and copyright information.
Defines the serial communication parameters and protocol used.
Specifies the format for sending commands and receiving feedback.
Provides a comprehensive list of available serial commands and their parameters.
General| Brand | BlueVision |
|---|---|
| Model | BVC6100LM |
| Category | Digital Camera |
| Language | English |
To Next Page