How to fix a Bluewheel hoverboard that is not responding?
If your Bluewheel hoverboard isn't responding, first try activating it with the on/off button. If that doesn't work, charge the battery. In case the unit experienced a violent shock, try deactivating and then reactivating the device.
Why is the LED warning light on and a signal heard on my Bluewheel hoverboard?
If the LED warning light is on and you hear a signal on your Bluewheel hoverboard, it could be due to several reasons. You might be traveling at too high a speed, on a steep gradient, or the wheels could be locked. In any of these cases, reduce your speed. Also, the battery may be too low, so reduce your speed and charge the battery immediately and fully. Clean the wheels from any obstructions like foliage or pebbles.
Details specifications for the Bluewheel Scooter, battery charger, and battery.
Outlines the correct and incorrect ways to use the hoverboard, including road usage and user restrictions.
Provides essential safety guidelines for operating the hoverboard, including speed, balance, and environmental conditions.
Details crucial safety measures for the hoverboard's battery, including protection from elements and storage guidelines.
Covers safety precautions for using the hoverboard charger, including handling, maintenance, and environmental considerations.
General| Motor | 2 x 250W |
|---|---|
| Wheel Size | 6.5 inches |
| Max Speed | 12 km/h |
| Max Range | 15 km |
| Max Load | 100 kg |
| Charging Time | 2-3 hours |
| Bluetooth | Yes |
| LED Lights | Yes |
| Battery | 36V, 4.4Ah |
To Next Page
