5
Nickel- or chrome-plated surfaces
>
Oil
S O LV EN T S
■ Scrubbing household cleaners and accessories (bristly
cloths, sponges, etc).
■ Strong alkaline or strong acid substances.
■ Chloral cleaners.
■ Micro fibres might harm surfaces in the event of
scrubbing.
■ Acetone solvents, nitro thinners, Sal ammoniac or
solvents whose nomenclature contains terms that
begin with Tri/Tetra.
■ Rub with a soft, damp cloth. Dry cloth should be used
for wet surfaces.
Under the above-mentioned circumstances,
the following should NOT be used:
>
To clean the most intricate parts of Blum products such as TANDEMBOX pull-out systems and CLIP top
hinges, dis-assembling its parts is well-recommended. The following pages will lead you to proper and
easy methods of removing, re-assembling and adjusting elaborative parts of TANDEMBOX, CLIP/CLIP top,
BLUMOTION for doors and TANDEM. Should you need assistance, you may call our hotline at
+65 6547 1760 or visit our website at connect.blum.com.