Assembly instructions
Step 1 — Remove door
Remove hinge from CLIP mounting plate.
Step 2 — Rotate hinge arm
Rotate hinge arm to closed position.
Step 3 — Insert angle restriction clip
Insert angle restriction clip (70T3553) into
base of hinge arm and secure.
Step 4 — Rotate hinge arm
Rotate hinge arm to open position.
Step 5 — Reattach door
Align door and reattach to CLIP mounting plate.
Restricts opening angle to 86°
CLIP top 110° angle restriction clip
Subject to technical modifications without notice. © 2011 Blum, Inc.
LIT.HNG5201.07.11
NOTE: For use with all CLIP top 110° and 110°
+
hinges (this includes CLIP top BLUMOTION)
To Next Page
Need help?
General
