BLUM 563H5330B User Manual

TANDEM plus BLUMOTION
Subject to technical modifications without notice. © 2015 Blum Inc.
Dimensions in millimeters (inch equivalents as noted)
1
Side-to-side adjustment Rear side-to-side adjustment
1
Rotate side-to-side adjustment left or
right equally on both locking devices. Drawer
front moves in the same direction as rotation.
2
After front side-to-side adjustment is
made with the locking devices, rotate the
rear side-to-side adjustment left or right
to re-align the back of the drawer box with
the front. Drawer back moves in the same
direction as rotation.
Maximum 1.5 (1/16") to left or right in both front and rear (tool-free)
NOTE: Side-to-side adjustment not available on T51.x8xx locking devices
Height adjustment Tilt adjustment
1
Press up on adjustment tab
2
Push towards back of drawer
Maximum 3 (1/8") rise of drawer front (tool-free)
Rotate the tilt adjustment lever on the rear of
each runner to lift the back of the drawer and
tilt the top of the drawer front forward
Maximum 5 (3/16") rise of drawer back (tool-free)
NOTE: Height and tilt adjustments available with all combinations of locking devices and runners
Full extension concealed runners
Basic components Locking devices Runners Rear attachment options
Depth adjustment on runner
TANDEM 563 runners feature elongated
holes that allow ±4.5 (3/16") depth adjustment
Depth adjustable locking device
Locking device
with side-to-side,
height and
depth adjustment
Turning the adjustment screw allows
for up to a
+
2.5 (3/32") out adjustment
NOTE: For T51.1901.PS setback in inset
applications, see page 5
g
R
L
R
L
Drawer
front
L
R
L R
T51.1901.PS
0
0
1
2
563H/563. installation instructions563H/563. installation instructions

BLUM 563H5330B Specifications

General

Brand	BLUM
Model	563H5330B
Category	Indoor Furnishing
Language	English

Summary

Full Extension Runner Adjustments

Basic Components Overview

Visual guide to the primary components of the full extension concealed runners.

Side-to-Side Adjustment

Instructions for adjusting the drawer front left or right using locking devices.

Rear Side-to-Side Adjustment

Procedure to align the drawer box back after front side-to-side adjustment.

Height and Tilt Adjustments

How to adjust the height of the drawer front and tilt the drawer top forward.

Drawer Specifications and Installation Prep

Drawer Box Dimensions

Detailed specifications and diagram for drawer box construction and clearances.

Calculating Drawer Width

Table and example for calculating correct outside drawer width based on side thickness.

Hardware Installation Preparation

Guidance on screws, pre-boring for locking devices, and rear hooks.

Drawer Insertion and Removal

Step-by-step instructions for safely inserting and removing the drawer assembly.

Face Frame Application Mounting

Runner Mounting Specifications

Diagrams and dimensions for mounting runners to face frame cabinets.

Cabinet and Drawer Dimensions

Specifications for cabinet and drawer sizes for face frame applications.

Attachment Hardware

Details on rear mounting brackets, sockets, and screws for face frame systems.

Panel Application Mounting

Runner Mounting Specifications

Diagrams and dimensions for mounting runners to panel cabinets.

Cabinet and Drawer Dimensions

Specifications for cabinet and drawer sizes for panel applications.

Mounting Hardware

Details on specific hardware like sockets and screws for panel systems.

Inset Application Setback Calculations

Face Frame Setback Diagrams

Visual guides for runner setback in complete and partial blockout face frames.

Panel Application Setback

Diagram illustrating runner setback for panel applications.

Setback for Depth Adjustable Lock

Table for calculating runner setback with T51.1901.PS depth adjustable locking devices.

Setback for Other Locking Devices

Table for calculating runner setback with all other types of locking devices.

Attachment Specifications and Adjustments

Rear Attachment Options

Details on rear mounting brackets and sockets for face frame applications.

Depth Adjustment Specifications

Values A and B for depth adjustment based on runner and cabinet dimensions.

Bottom Mounting Specifications

Dimensions X, Y, and Z for bottom mounting runners to cabinets.