BLUM TANDEM plus BLUMOTION 563H

Drawer insertion
Drawer removal
1. Squeeze orange handles on
locking devices
2. Pull drawer straight out and up
1. Place drawer on runners and
close. Locking devices will
automatically connect to runners.
INST-TDM563H.03.12
Subject to technical modifications without notice. © 2012 Blum, Inc.
New side adjustment
New rear side adjustment
2. After front side adjustment is
made with the locking devices,
rotate the rear side adjustment left
or right to re-align the back of the
drawer box with the front. Drawer
back moves in the same direction
as rotation.
R
L
R
L
drawer
front
1. Rotate side adjustment left
or right equally on both locking
devices. Drawer front moves in
the same direction as rotation.
with locking device
Maximum 1.5 (1/16") to left or right (tool-free) Maximum 1.5 (1/16") to left or right (tool-free)
Height adjustment
Tilt adjustment
Rotate the tilt adjustment lever
on the rear of each runner to
tilt the top of the drawer front
forward.
1. Press up on adjustment tab
2. Push towards back of drawer
Maximum 5 (3/16") rise of drawer back (tool-free)Maximum 3 (1/8") rise of drawer front (tool-free)
1
2
New depth adjustment on runner
TANDEM 563 runners feature elongated holes
that allow
+
/- 4.5 (3/16") depth adjustment.
Turning the adjustment screw allows for up to a
+
2.5 (3/32") out adjustment
T51.1901.PS
Locking device
with side, height and
depth adjustment
New profile setback
New bottom mounting
L
R
See blum.com for complete technical specifications and installation instructions.
3 (1/8")
X
67 (2-5/8")
9 (11/32")
12 (15/32")
19 (3/4")
9 (11/32")
32 (1-1/4") 37 (1-15/32")
10
(13/32")
37 (1-15/32")
setback 3 (1/8")
New depth adjustable locking device
Runner 563H5330B 563H4570B 563H3810B All 563.
X 448 (17-5/8") 378 (14-7/8") 319 (12-9/16") 358 (14-3/32")
TANDEM plus BLUMOTION 563H/563.
T51.19xx
NOTE: Hole locations to the face of the cabinet stay the same. For inset
applications see the TANDEM brochure
NOTE: For T51.1901.PS setback in inset applications, see the TANDEM brochure
NOTE: Side adjustment not available on T51.18xx locking devices
NOTE: Height adjustment available on all TANDEM locking devices
BAU0026348946 INDR 1091737 MA-578/0EN TAND 563H/.-B

BLUM TANDEM plus BLUMOTION 563H Specifications

General

Model	563H
Extension Type	Full Extension
Material	Steel
Brand	Blum
Motion Technology	BLUMOTION

Summary

TANDEM 563 H563 Adjustment Features

Side and Rear Side Adjustment

Adjusts drawer front and box alignment side-to-side. Max 1.5mm adjustment.

Height and Tilt Adjustment

Adjusts drawer front height and tilt. Max 3mm front rise, 5mm back rise.

Depth Adjustment Capabilities

Runner slots allow +/- 4.5mm depth, locking device allows +2.5mm.

TANDEM 563 H563 Mounting and Handling

Profile Setback and Bottom Mounting

Specifies dimensions for profile setback and bottom mounting hole locations.

Drawer Insertion and Removal

Guides for connecting and disconnecting the drawer from runners.

TANDEM 563562 Runner Preparation and Compatibility

Drawer Preparation Differences

Details screw changes and notch width updates for 563 runners vs 562.

Locking Device and Template Usage

Distinguishes locking devices and describes template installation.