BLUM TANDEM plus BLUMOTION 563F

LIT.TDM563F.PI2.08013
Dimensions in millimeters (inch equivalents as noted)
Subject to technical modifications without notice. © 2013, Blum Inc.
Height adjustment Tilt adjustment
1
Pr
ess up on adjustment tab
2
Push t
owards back of drawer
Maximum 3 (1/8") rise of
drawer front (tool-free)
Rotate the tilt adjustment
lever on the rear of each
runner to tilt the top of the
drawer front forward.
Maximum 5 (3/16") rise of
drawer back (tool-free)
NOTE: Height adjustment available on all TANDEM locking devices
TANDEM plus BLUMOTION 563F
New side adjustment New rear side adjustment
Rotate side adjustment left or
right equally on both locking
devices. Drawer front moves in
the same direction as rotation.
with locking device
T51.19xx
After front side adjustment is
made with the locking devices,
rotate the rear side adjustment
left or right to re-align the back
of the drawer box with the front.
Drawer back moves in the
same direction as rotation.
Maximum 1.5 (1/16") to left or right (tool-free)
NOTE: Side adjustment not available on T51.18xx locking devices
Maximum 1.5 (1/16") to left or right (tool-free)
R
L
R
L
drawer
front
L
R
L R
New depth adjustment on runner New depth adjustable locking device
TANDEM 563 runners feature
elongated holes that allow
±4.5 (3/16") depth adjustment.
Locking device
T51.1901.PS
with side, height
and dept
h adjustment
Turning the adjustment screw allows
for up to a
+
2.5 (3/32") out adjustment
NOTE: For T51.1901.PS setback in inset applications, see the
TANDEM brochure
1
2
New profile setback New bottom mounting
NOTE: Hole locations to the face of the cabinet stay the same.
For inset applications see the TANDEM brochure.
Runner 563F5330B 563F4570B 563F3810B
X 44
8 (17-5/8") 378 (14-7/8") 319 (12-9/16")
Drawer insertion Drawer removal
Place drawer on runners and
close. The locking devices
automatically engage with
the runners.
1
Squeeze orange handles on
locking devices
2
Pull dra
wer straight out and up
1
2
32 (1-1/4") 37 (1-15/32")
10 (13/32")
37 (1-15/32")
setback 3 (1/8")
3 (1/8")
X
67 (2-5/8")
9 (11/32")
22.5 (7/8")
9 (11/32")
15.5 (5/8")

BLUM TANDEM plus BLUMOTION 563F Specifications

General

Brand	BLUM
Model	TANDEM plus BLUMOTION 563F
Category	Indoor Furnishing
Language	English

Summary

New Side Adjustment

New Rear Side Adjustment

Re-aligns the drawer box back with the front after front side adjustment.

Height and Tilt Adjustments

Height Adjustment

Allows the drawer front to rise via an adjustment tab on the runner.

Tilt Adjustment

Tilts the drawer front forward using a lever on the rear of each runner.

Depth Adjustment Features

Depth Adjustment on Runner

Elongated holes on TANDEM 563 runners allow ±4.5 (3/16") depth adjustment.

New Depth Adjustable Locking Device

T51.1901.PS locking device allows up to +2.5 (3/32") outward adjustment.

Installation and Mounting

New Profile Setback

Defines setback dimensions for drawer profiles on the cabinet face.

New Bottom Mounting

Shows hole locations for bottom mounting of runners on the cabinet.

Drawer Preparation and Runner Systems

Drawer Preparation

Details drilling dimensions, bore for hook, and rear notch requirements.

Locking Devices and Compatibility

Explains differences in locking devices (T51.17xx, T51.18xx, T51.19xx) and runner compatibility.

TANDEM Templates

Old TANDEM Template

Information on the previous TANDEM template used with 562 runners.

New TANDEM Template

Details the new TANDEM template for 562 and 563 runners.