Need help?Do you have a question about the BLUM AVENTOS HK and is the answer not in the manual?
General| Brand | Blum |
|---|---|
| Type | Lift system |
| Application | Wall cabinet |
| Material | Steel |
| Closing | Soft-close |
Access Blum's online tools for kitchen planning and ordering, including the Online Product Configurator (OPC).
Details on ordering components, including safety warnings and power factor calculation.
Clearances and mounting specifications for frameless and face frame cabinets.
Illustrates mounting plate locations and choices for various door types and applications.
Safety warnings, power factor calculation, clearances, and mounting for narrow aluminum doors.
Details on selecting lift mechanism sets, cover sets, and hardware for narrow aluminum doors.
Lists required components for TIP-ON sets, including lift mechanisms, cover sets, and hardware.
Details TIP-ON sets for standard and large doors, including specifications and catch plate requirements.
Steps for installing the lift mechanism, attaching doors, and adjusting tension, including safety warnings.
Details on door adjustments, cover cap installation, and opening angle adjustments.
Information on face frame mounting brackets, their sets, and installation locations.
Details on drivers, bits, and templates required for assembly and installation.
Details on SERVO-DRIVE sets, cover sets, and power supply options.
Information on power supply sets, switches, adapters, and system specifications.
Diagrams and instructions for wiring the SERVO-DRIVE system on the cabinet top panel and cable connections.
Steps for installing activation switches, distance bumpers, and universal cables for the SERVO-DRIVE system.
Detailed steps for positioning and locking the SERVO-DRIVE drive unit onto the lift mechanism.
Explains start-up, additional features, deactivation, and the function of buttons on the SERVO-DRIVE system.
Step-by-step guide for linking the SERVO-DRIVE switch and drive unit.
Instructions for performing a reference run, including error detection and tension adjustment.
Guide on synchronizing multiple drive units for simultaneous movement.
Steps to link drive units to prevent multiple fronts from opening simultaneously.
Procedures for replacing the switch battery and resetting the drive unit to factory settings.
Step-by-step guide on how to safely remove the SERVO-DRIVE unit and disconnect cables.
Information and usage guide for the SERVO-DRIVE switch boring template for accurate installation.
To Next Page
