SERVO-DRIVE for
AVENTOS HK top
B
Start reference run
The drive unit recognizes the required parameters using the reference run.
Reference Run
2x
2x
Press flashing play button. Door will cycle twice. Do not interrupt.
Ok button lights continuously. Setup complete.
Reference run with error detection.
Unbalanced door error detection
after reference run.
Adjust tension accordingly
to balance door.
Press play button to perform
reference run again.
Too much tension. Not enough tension.
21
3
1 2 3
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
29
To Next Page
Loading...
