SERVO-DRIVE for
AVENTOS HK top
Drive Unit Synchronization
C Activating synchronization
Up to three drive units can be synchronized allowing them to move
simultaneously. This function is required for several cabinets with a
single front.
NOTE: Up to 6 switches can be programmed to a single drive unit
1
Press link button on second drive unit. Recommended
to link switches at this step as well.
Ok button lights continuously.
Press flashing play button to start reference run and
complete synchronization.
Confirm link by pressing flashing ok button.
2
1
Press link button on first drive unit.
2
Link button lights continuously.
43
65
© 2021 Blum, Inc. Subject to technical modifications without notice
30
To Next Page
Loading...
