BLUM COMPACT BLUMOTION 38C Series

Cam side adjustment
Rotate front screw
counter-clockwise to
increase door overlay,
clockwise to decrease.
Range
=
3 (1/8")
Large overlay Small overlay
Height adjustment
Loosen center screw.
Adjust door to position
and tighten screw.
Range
=
6 (1/4")
Large overlay Small overlay
Door removal
Rotate mounting screw counter-clockwise to
remove hinge from cabinet.
Large overlay Small overlay
2
Subject to technical modifications
without notice. © 2010
Cam depth adjustment
Rotate back screw to
adjust door to position.
Range
=
-1/
+
2
(-1/32"/
+
3/32")
COMPACT BLUMOTION and COMPACT 38C/39C and 38N
series

BLUM COMPACT BLUMOTION 38C Series Specifications

General

Product Series	COMPACT BLUMOTION 38C
Hinge Cup Mounting	Screw-On
Material	Steel
Finish	Nickel Plated
Adjustment	3-Dimensional
Application	Face Frame Cabinets
Closing Type	Soft-Close
Mounting Type	Face Frame

Summary

Cam Side Adjustment

Height Adjustment

Cam Depth Adjustment

Door Removal

COMPACT BLUMOTION Deactivation Switch

Suggested Tools for Installation

POZI DRIVER and Bits

A POZI screwdriver with distinctive "tick" marks is crucial for full torque on Blum mounting screws.