BLUM AVENTOS HK - Planning Specifications

AVENTOS HK top Planning Specifications
for Frameless and Face Frame
AVENTOS
Lift mechanism clearance
Door and hardware clearance
Face Frame Application
Door and hardware clearance
Frameless Application
187 min.
572 max.
192 min.
250 (10") to 610 (24")
Z
door height + 1.5
173 min.
235 min.
Lift mechanism positioning
Attachment for lift mechanism for wood screws including positioning template.
Minimum gap
NOTE: Min gap assumes door radius of 1
Overlay up to 25.4
gap
1.5
Minimum bottom reveal
Door and Hardware Clearance
1.5 min.
2 min.
Decorative molding clearance
Door thickness 16
19 22 26
maximum X
68 57 47 33
X
door thickness
SERVO-DRIVE
SERVO-DRIVE
187 min.
572 max.
192 min.
250 (10") to 610 (24")
door height + 1.5
173 min.
235 min.
Z
1
2
SERVO-DRIVE
91
30 30
NOTE: Z = door height x 0.29 + door thickness minus
top panel thickness
NOTE: Z = door height x 0.29 + door thickness minus
top frame width
© 2021 Blum, Inc. Subject to technical modifications without notice
8