BLUM AVENTOS HK - Assembly Aids

Universal individual template
▬ Used to pre-bore for AVENTOS lift
mechanism locating pins
▬ Also used for pre-boring for cabinet profiles
and BLUMOTION for doors and TIP-ON
for doors adapter plates
▬ Calibrated scale for accurate setting
Set includes:
1
Universal individual template
2
Ø2.5 stop collar
3
Ø5 stop collar
Part no.
Template
65.1051.02
Ø2.5 drill bit
DB-2.5mm R
Ø5 drill bit
DB-5mm R
Short TORX DRIVER
▬ For AVENTOS HK top and
LEGRABOX adjustments
▬ TORX size 20 (T20)
▬ Blade length 35
Part no.
T20 TORX DRIVER
SHORT TORX DRIVER
POZI DRIVER
A POZI screwdriver (different from
Phillips) is the most crucial tool
you can use to assure that full
torque is applied to all Blum
mounting screws. POZI screws
can be identified by the distinctive
“tick” marks located in the center
of the screwhead recess.
Part no.
#2 POZI DRIVER
POZI DRIVER
1/4" Magnetic bit holder
BIT HOLDER
#2 x 1" POZI bit insert
POZI BIT #2X1
#2 x 2" POZI bit insert
POZI BIT #2X2
TORX
Phillips
Tick marks
POZI
Front marking template for HK top
▬ Used to determine the location for the arm
assembly mounting plate
▬ Side overlay adjustable from 12 to 21 mm
▬ Calibrated scale for accurate setting
▬ Only intended for frameless cabinets
▬ Instructions included with template
Part no.
Template
ZML.2200
Assembly Aids
AVENTOS
2
3
1
TORX DRIVER
▬ For AVENTOS HK top and
LEGRABOX adjustments
▬ TORX size 20 (T20)
▬ Blade length 100
▬ Total length 210
Part no.
T20 TORX DRIVER
TORX DRIVER
ts
0
TORX
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
19